What is the significance of distinguishing between the nominal diameter d0 and the pitch diameter Dpw of ball screws?

The nominal diameter d0 serves as an identification, has no tolerance, and takes an integer value, which facilitates business and management. The pitch diameter DPW has a tolerance band and can be a decimal, which serves as a parameter in engineering planning. 19 What is the significance of distinguishing between positioning (P type) and transmission (T type) types? The two types of ball screws are used in different places and functions. P type is used for precision positioning. T type is used for force transmission, and the thread accuracy only checks the full-length stroke error and any 300mm stroke variation, which is much lower than the P type of the same level.

What kind of evolution has the ball screw pair standard (GB) undergone?

The early Su Q/J.JB11-78 standard is the earliest local professional standard in China. The accuracy code is divided into C-J-B-P-T levels, and B is the standard level. The later JB3162-82 is the ministerial standard with the longest application time and the widest influence. It refers to the German DIN69051 standard, and the accuracy code is divided into: C-D-E-F-G-H level, E is the standard level.

The later JB/GQ1098-87 is the supplement of JB3162-82. The JB/T3162-91 standard applies the international standard and is still a ministerial standard. The current standard is: GB/T17587.3-1998, and the ball screw application is equivalent to the international standard ISO3408-1992. The accuracy code is: 1-2-3-4-5-7-10, and level 4 is the standard level.

What requirements should be checked for ball screw pairs?

Check the four requirements of installation size, quantitative accuracy, performance, and surface. What is the meaning of ball thread accuracy? The distance that the nut travels relative to the screw is called “stroke”. The difference between the actual distance and the expected (ideal) distance is called “stroke deviation”. The error of the nut on each section of the screw is not exactly the same, and the average value is taken as the “average stroke error”. Because it is measured on the full length of the thread (of course, it refers to the effective range), it is commonly called “full length.

The spiral line fluctuates and changes within a certain range. Along a “central axis”, the connection between the peaks and troughs forms a “belt”. The line has no width, but the belt has width. Commonly known as “bandwidth”, the principle of ball screw refers to the range of stroke variation width over the full length. In fact, the variation within any 300mm (commonly known as “300”) and the variation within one tooth (commonly known as “2π” or “cycle”) are both concepts of “bandwidth”. It just measures the length of the interval.