Installation steps of linear bearings
Linear bearings are widely used in various mechanical equipment due to their lightweight, corrosion resistance, interchangeability, low cost and other characteristics. Their performance can achieve high economic benefits of labor saving and automation. So, how should linear bearings be installed? The following content will discuss the installation of linear bearings. Installation steps of linear bearings
1. Before installing linear bearings, the burrs, dirt and surface of the mechanical mounting surface must be cleaned. Linear bearings are coated with anti-rust oil. Please clean the reference surface with cleaning oil before installation. Usually, the reference surface is prone to rust after being cleaned with anti-rust oil. It is recommended to use lubricating oil on spindles with low viscosity.
2. Place the linear bearing gently on the bed, and use lateral fixing screws or other fixing tools to gently fit the linear rail and lateral mounting surface. Before installation and use, confirm whether the screw holes are consistent. Assuming that the machined holes in the base are inconsistent and the bolts are forcibly fixed, it will affect the assembly accuracy and quality of use.
3. Tighten the positioning screws of the linear bearing in order from the center to both sides to make the track fit the vertical mounting surface. Tighten from the center to both ends to obtain more stable accuracy. After the vertical reference surface is slightly tightened, strengthen the side The locking force towards the reference surface enables the linear bearing to effectively fit the lateral reference surface.
4. Use a torque wrench to tighten the torque one by one according to various materials, and slowly tighten the positioning screws of the linear bearing slide rail.
5. Use the same installation method to install the auxiliary rails, and install individual sliding seats on the main rails and auxiliary rails. Note that after the sliding seat is installed on the linear sliding track, due to the limited installation space, many subsequent accessories cannot be installed and must be installed together at this stage.
6. Gently place the mobile platform on the sliding seats of the linear bearing main rail and auxiliary rail, then lock the lateral pressing screws on the mobile platform, and the installation can be completed after positioning. The above content is a detailed introduction to the installation of linear bearings. I hope the above content can be helpful to you!
Leave A Comment