Product Details
| Product Name: | Width Of Guide Rail: | Combi Of Height: |
|---|---|---|
| Linear Guide Rail | 8-32mm | 4-16mm |
| Type: | Material: | Slide Rail Height: |
| Linear Rolling Guide | Stainless steel | 2.6-10mm |
Product Description
The design of the YSS series offers a low profile,high load capacity,and high rigidity.It also features an equal loadrating in all four directions and self-aligning capability to absorb installation-error,allowing for higher accuracies.Additionally,the lower assembly height and the shorter length make the MG series more suitable for high-speed,automation machines and applications where space is limited.
The retainer is designed to hold the balls in the block even when it is removed from the rail.
YSS Series-Miniature Linear Guideway
Features of YSS Series
Design features of narrow type miniature guideways-YSS:
1.Tiny and lightweight,suitable for miniature equipment.
2.Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
3.Specification with ball retainers would avoid ball falling when the blocks are removed from rails.
4.Interchangeable types are available in certain sizes and precision grades.
| model | Component size (mm) |
Slider size ( m m ) | Guide rail size ( m m ) | guide rail Fixing bolts size |
Basic dynamic load rating | Basic static load rating | Allowable static moment | weight | |||||||||||||||||||||||
| M N-m |
M, N-m |
M₄
N-m |
slider
kg |
guide
kg/m |
|||||||||||||||||||||||||||
| H | H₁ | N | W | B | B₁ | C | L₁ | L | G | G, | M×I | H₂ | W | H | D | h | d | P | E | (mm) | C(kN) | C₉ (kN) | |||||||||
| YSS3MS | 4 | 1 | 2.5 | 8 | 3.5 | 6.7 | 12 | M1.6×1.3 | 3 | 2.6 | 1.6 | 10 | 5 | M1.6×1 | 0.19 | 0.32 | 0.6 | 0.4 | 0.4 | ||||||||||||
| YSS3MN | 5.5 | 10.7 | 16 | M2×1.3 | 0.3 | 0.58 | 0.9 | 11 | 11 | ||||||||||||||||||||||
| YSS5MS | 6 | 1 | 3.5 | 12 | 8 | 2 | 9.7 | 16 | M2×2 | 5 | 3.7 | 3.6 | 0.8 | 2.4 | 15 | 7.5 | M2×6 | 0.34 | 0.56 | 1.7 | 1 | 1 | |||||||||
| YSS5MN | 12.7 | 19 | 0.48 | 0.92 | 2.4 | 2.1 | 2.1 | ||||||||||||||||||||||||
| YSS 7MS | 8 | 1.5 | 5 | 17 | 12 | 2.5 | 8 | 13.5 | 22.5 | φ12 | M2×2.5 | 1.5 | 7 | 4.8 | 4.2 | 2.3 | 2.4 | 15 | 5 | M2×6 | 0.98 | 1.24 | 4.70 | 2.84 | 2.84 | 0.010 | 0.22 | ||||
| YS57MN | 13 | 21.8 | 30.8 | 1.37 | 1.96 | 7.64 | 4.80 | 4.80 | 0.015 | ||||||||||||||||||||||
| YSS9MS | 10 | 2 | 5.5 | 20 | 15 | 2.5 | 10 | 18.9 | 28.9 | φ12 | M3×3 | 1.8 | 9 | 6.5 | 6 | 3.5 | 3.5 | 20 | 7.5 | M3×8 | 1.86 | 2.55 | 11.76 | 7.35 | 7.35 | 0.016 | 0.38 | ||||
| YSS9MN | 16 | 29.9 | 39.9 | 2.55 | 4.02 | 19.60 | 18.62 | 18.62 | 0.026 | ||||||||||||||||||||||
| YSS12MS | 13 | 3 | 7.5 | 27 | 20 | 3.5 | 15 | 21.7 | 34.7 | φ1. | M3×3.5 | 2.5 | 12 | 8 | 6 | 4.5 | 3.5 | 25 | 10 | M3×8 | 2.84 | 3.92 | 25.47 | 13.81 | 13.81 | 0.034 | 0.65 | ||||
| YSS12MN | 20 | 32.4 | 45.4 | 3.72 | 5.88 | 39.22 | 36.26 | 36.26 | 0.054 | ||||||||||||||||||||||
| YSS15MS | 16 | 4 | 8.5 | 32 | 25 | 3.5 | 20 | 26.7 | 42.1 | 4.5 | M3 | M3×4 | 3 | 15 | 10 | 6 | 4.5 | 3.5 | 40 | 15 | M3×10 | 4.61 | 5.59 | 45.08 | 21.56 | 21.56 | 0.059 | 1.06 | |||
| YSS15MN | 25 | 43.3 | 58.8 | 6.37 | 9.11 | 73.50 | 57.82 | 57.82 | 0.092 | ||||||||||||||||||||||
| 置
スライド |
量(参考) g トラッ L — 儿 (100mm当b) |
アッ
H |
tンプリ mmH |
寸法
N |
W₂ | W₁ | W | スライド
L |
ユニッ mmL₂ |
ト寸法
L |
M , x 深 古 | H₃ | W | H | ト
M₂ |
ラッタレ md₃ |
ールす md |
法
h |
E | F | トラッタレール(²) 取付け用添付ボルト mmねじの呼びx! |
基 本動 定格荷重()C N |
基 本 静 定格荷重(*)C N |
静定
T₀ |
格モーメン
Tx N-m |
ト(⁴ )
T₁ N-m |
||
| LWLC 5…B | 3.4 | 12 | 6 | 1 | 3.5 | 12 | 8 | 2 | 16 | 9.6 | M2×1.5 | 1.2 | 5 | 3.7 | 2.4 | 3.6 | 0.8 | 7.5 | 15 | 精密機器用十字穴付き女べ小ねじ M2×6 |
562 | 841 | 2.2 | S | ||||
| LWLC 5…N* | 13 | M2.5 贯通 |
一 | 一 | M25x0(3 添付しません) |
|||||||||||||||||||||||
| 4.3 4.4 |
12 | 19 | 12.6 | 2.4 | 3.6 | 0.8 | 精密機器用十字穴付き女べ小ねじ M2×6 |
676 | 1090 | 2.9 | 1 | |||||||||||||||||
| LWL 5…B | ||||||||||||||||||||||||||||
| 4.3 | 13 | M2.5 贯通 |
一 | 一 | M25x8(3 (添付しません) |
|||||||||||||||||||||||
| LWL 5-N | 4.4 | |||||||||||||||||||||||||||
| 6.7 | 22 | 8 | 1.5 | 5 | 17 | 12 | 2.5 | 19 | 一 | 9.6 | M2×2.5 | 1.5 | 7 | 5 | 2.4 | 4.2 | 2.3 | 7.5 | 15 | 六角穴付走术儿卜 M2×6 |
937 | 1140 | 4.1 | 1.8 14.9 |
123 | |||
| LWLC 7…B | 7.1 | |||||||||||||||||||||||||||
| 6.7 | 24 | M3 贯通 |
一 | 一 | M3XE(2 (添付しません) |
|||||||||||||||||||||||
| LWLC 7…N* | 7.1 | |||||||||||||||||||||||||||
| 9.1 | 22 | 23.5 | 8 | 14.3 | 一 | 2.4 | 4.2 | 2.3 | 六角穴付走术儿卜 M2×6 |
1330 | 1890 | 6.9 | 2 | 23 心 | ||||||||||||||
| LWL 7…B | 10 | |||||||||||||||||||||||||||
| 9.1 | 24 | M3 贯通 |
一 | 一 | 一 | M3×2(3) (添付しません) |
||||||||||||||||||||||
| LWL 7=N | 10 | |||||||||||||||||||||||||||
| 13 | 22 | 31 | 12 | 21.6 | 一 | 2.4 | 4.2 | 2.3 | 六角穴付走术儿卜 M2×6 |
1690 | 2650 | 9.7 | 8.8 50.7 |
.7.4 42.5 |
||||||||||||||
| LWLG 7…B | 14 | |||||||||||||||||||||||||||
| 13 | 24 | M3 贯通 |
一 | 一 | M3X((3) (添付しません) |
|||||||||||||||||||||||
| LWLG 7…N* | 14 | |||||||||||||||||||||||||||
| LWLC 9…-B | 11 | 35 | 10 | 2 | 5.5 | 20 | 15 | 2.5 | 21.5 | 一 | 11.9 | M3×3 | 2.2 | 9 | 6 | 一 | 3.5 | 6 | 3.5 | 10 | 20 | M3×8 | 1180 | 1480 | 6.9 | 218 | ||
| LWLC 9…-N* | 37 | M4 贯通 |
一 | 一 | M4X&(3) (添付しませA) |
|||||||||||||||||||||||
| 18 | 35 | 30 | 10 | 20.8 | 一 | 3.5 | 6 | 3.5 | M3×8 | 1810 | 2760 | 12.8 | 591 | 428 | ||||||||||||||
| LWL 9-B | 19 | |||||||||||||||||||||||||||
| LWL 9…-BCS | ||||||||||||||||||||||||||||
| 18 | 37 | M4 貫通 |
M4XF) (添付しません) |
|||||||||||||||||||||||||
| LWL 9–N* | 19 | |||||||||||||||||||||||||||
| 26 | 35 | 40.5 | 15 | 30.9 | 一 | 3.5 | 6 | 3.5 | M3×8 | 2370 | 4.030 | 18.7 | 38d | |||||||||||||||
| LWLG 9…B | 28 | |||||||||||||||||||||||||||
| 26 | 37 | M4 贯通 |
一 | 一 | M4Xx(3 (添付しませA) |
|||||||||||||||||||||||
| LWLG 9…-N* | 28 | |||||||||||||||||||||||||||
| 34 | 35 | 50 | 26 | 40.4 | 一 | 3.5 | 6 | 3.5 | M3×8 | 2870 | 5300 | 24.6 | 12⁹ | 1 | ||||||||||||||
| 37 | M4 贯通 |
一 | 一 | M4Xx(3 (添付しません) |
||||||||||||||||||||||||
| LWLC 12B | 22 | 65 | 13 | 3 | 7.5 | 27 | 20 | 3.5 | 25 | 一 | 13 | M3×3.5 | 2.7 | 12 | 8 | 一 | 3.5 | 6.5 | 4.5 | 12.5 | 25 | M3X8 | 2210 | 2380 | 14.8 | 472 | 4.5 35.0 |
|
| 34 | 34 | 15 | 21.6 | 3330 | 4290 | 26.6 | 15.4 93.1 |
12.9 78.2 |
||||||||||||||||||||
| LWL 12~-B | 35 | |||||||||||||||||||||||||||
| LWL 12–BCS | ||||||||||||||||||||||||||||
| 48 | 44 | 20 | 4310 | 6200 | 38.4 | 30.6 168 |
17 | |||||||||||||||||||||
| LWLG 12…-B | 51 | |||||||||||||||||||||||||||
| 70 | 59.5 | 30 | 47.3 | 5820 | 9540 | 59.1 | 69.8 339 |
28 | ||||||||||||||||||||
| 43 | 107 | 16 | 4 | 8.5 | 32 | 25 | 3.5 | 32 | 17.8 17.7 |
37 | M3X4 | 3.1 | 15 | 10 | 3.5 | 6.5 | 4.5 | 20 | 40 | M3×10 | 3490 | 3890 | 30.0 | 788 | ||||
| LWLC 15…B | 42 | |||||||||||||||||||||||||||
| 63 | 42 | 20 | 27.9 | 47 | 4980 | 6490 | 50.0 | 1727 | 44. | |||||||||||||||||||
| LWL 15…-B | 64 | 27.8 | ||||||||||||||||||||||||||
| LWL 15…BCS | ||||||||||||||||||||||||||||
| 93 | 57 | 25 | 42.8 42.7 |
62 | 6620 | 9740 | 75.0 | 3 器⁹ | 284 | |||||||||||||||||||
| LWLG 15…-B | 95 | |||||||||||||||||||||||||||
| 122 | 72 | 40 | 57.7 | 76 | 8370 | 13600 | 105 | 强 | ||||||||||||||||||||
| LWLC 20…-B | 89 | 156 | 20 | 5 | 10 | 40 | 30 | 5 | 38 | 22.3 | 43 | M4X6 | 4.2 | 20 | 11 | 6 | 9.5 | 5.5 | 30 | 60 | M5×14 | 4580 | 530 | 54.0 | 19.4 134 |
112 | ||
| 130 | 50 | 25 | 34.6 | 55 | 6650 | 9080 | 92.6 | 2 器⁷ | 44.2 235 |
|||||||||||||||||||
| LWL 20…-B | 133 | |||||||||||||||||||||||||||
| LWL 20…-BCS | ||||||||||||||||||||||||||||
| 189 | 68 | 30 | 52.3 | 73 | 8510 | 12900 | 131 | 326 | 85.7 444 |
|||||||||||||||||||
| LWLG 20…-B | 196 | |||||||||||||||||||||||||||
| 189 | 243 | 25 | 5 | 12.5 | 48 | 35 | 6.5 | 54.5 | 一 | 31.9 | 64 | M6×7 | 5 | 23 | 15 | 7 | 11.0 | 9.0 | 30 | 60 | M6×16 | 9120 | 10600 | 128 | 34 | 48.1 316 |
||
| LWLC 25…-B | 190 | |||||||||||||||||||||||||||
| 305 | 78 | 35 | 55.7 | 88 | 13500 | 18500 | 223 | 137 744 |
||||||||||||||||||||
| LWL 25·-B | 310 | |||||||||||||||||||||||||||
| 405 | 98 | 40 | 75.5 | 108 | 16700 | 25200 | 303 | 1 | 348 1 |
|||||||||||||||||||
| LWLG 25…-B | 413 |
Tips for ordering linear guide and linear guide blocks:
(1) Tell us the width of linear guide: e.g. 9mm
(2) What is the size code of linear guide blocks, pls? E.g. MGN9C, HGH15CA and etc.
(3) What is the linear guide length you need, and how many guide blocks in one linear guide, pls? E.g. MNG91R80MM; 1 pcs of blocks on the 80mm linear guide
All Types we can produce Linear Guide:
LWL3B LWL3B LWLC5B MLC5 LWL5B ML5 LWL7B ML7 LWLG7B MLG7 LWL9B ML9 LWLG9B ML9 LWL12B ML12 LWLG12B MLG12 LWL15B ML15 LWLG15B MLG15 LWL20B ML20 LWLG20B MLG20
Our advantages for Linear guide YSR series:
1. Complete sliding units system with high accuracy and can be moved without deflection.
2. Long life use.
3. Prompt delivery and good service.
4. Large stock and low batch wholesale.
5. ISO9001:2008
6. Competitive price, good quality, delivery fast.
7. Fast response to e-mails or solving questions quickly.
8. Honest cooperation and service.
Rolling circulation system:Block,rail,ball,end cap and retainer lexcept size 2,3]
Lubrication system:Grease nipple is available for YSS15,lubricated by grease gun.
MGN7,9,12are lubricated by the hole at the side of the end cap.
Dust protection system:End seal lexcept size 21,bottom seal loptional size 9,12,15|,cap [size12,15]